Labconco FlaskScrubber Glassware Washer

Labconco Freestanding FlaskScrubber Glassware Washer is designed to hold narrow-neck glassware such as volumetric and Erlenmeyer flasks. Include a lower rack with 36 spindles and can be configured with specialized inserts to wash pipettes.


Manufacturer: Labconco Corporation

Model: 4420421

Product Code: 303714

Serial: 14079477

Tags: Lab Equipment, Sterilizers and Washers

Unfortunately, this product recently sold. Please fill out your contact information and a member of our Sales team will be in touch with you shortly to discuss availability. To return to our full inventory please click here.

Contact Us

Your request for quote has been submitted

Request a Quote

Required*


  • Product Details
  • Capabilities
FlaskScrubber Glassware Washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles (not available on FlaskScrubber 33 models)ensures thorough drying inside and out. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility. The washer may be outfitted with an Upper Standard or Spindle Rack to increase capacity.

Electrical: 208-230V, 50/60Hz, 11 Amps
Lower spindle rack, of Type 304 stainless steel, with 36 detachable large spindles for washing narrow-neck glassware. Rack accommodates a variety of inserts for holding beakers, culture tubes and other specialty glassware.
18 glassware holders, 36 clips and 10 additional interchangeable small spindles
Water temperature reaches 82 C (180 F) on 115 Volt models and 93 C (199 F) on 230 Volt models to sanitize glassware and for enhanced washing and faster drying
LCD information center for customizing cycles and monitoring operation, including internal water temperature ( C or F)
Water recirculation rates of 96 gal/min (363 liters/min) when operated on 115 Volt, 60 Hz and 230 Volt, 50 Hz and 112 gal/min (424 liters/min) on 230 Volt, 60 Hz for thorough cleaning
Dual pumps, one for washing and one for draining, to reduce potential for cross contamination
Built-in purified water pump to bring non-pressurized or pressurized purified water into the tank for up to six pure water rinses
Built-in steam generator that produces hot vapor to penetrate and remove dried residue for cleaner glassware
Manual-fill detergent dispenser for powder or liquid detergent
Manual-fill rinse aid solution dispenser
Built-in forced air drying into the tank up to 250 minutes and programmable from 38-70 C (100-158 F)
Factory-set cycle programs. All 115 volt models have seven programs: RINSE ONLY, PLASTIC, GLASS, GLASS PLUS, SCIENTIFIC, SCIENTIFIC PLUS, and DRY ONLY. All 208/230 Volt models have three additional programs for a total of ten: INTENSE, INTENSE PLUS and EXTREME.
Two user-set cycle programs
Programs may be locked to prevent unauthorized changes.
Alarms with display for HOT GLASS, PLEASE WAIT, WATER LOW, WATER HIGH and OVERFLOW, LIQ DETER, RINSE AID, DRAIN FAIL and LOW TEMP.
User-set delayed start (up to 8 hours)
Type 304, brushed stainless steel door, tank, upper and lower wash arms. Freestanding models also have stainless steel exterior sides and top.
One-piece, stainless steel, fine mesh particle drain filter to trap debris in tank to protect the pumps
No center water distribution tower allowing for greater glassware capacity
Four leveling feet
3/8&" Female NPT inlet fitting for hot tap water connection

Association of Machinery and Equipment Appraisers
Machinery Dealers National Association
Mass Bio
NAA Auctioneers

Quote Builder - Your Current List